PRODUCT DESCRIPTION: Path 2 Zero Energy WALL is a primerless, single component, high performance, fluid applied STPU (Silyl-Terminated-Polymer) that combines the best characteristics of silicone and urethane properties for exterior wall assemblies where it functions as an air and water barrier. Applied in a single coat via airless sprayer or roller, this durable elastomeric weatherproofing membrane provides two to three times the coverage of other fluid applied products.  Path 2 Zero Energy WALL has excellent elasticity and crack bridging capabilities contributing to a seamless durable air and water tight building envelope while being vapor open. DIRECTIONS FOR USE: Path 2 Zero Energy WALL may be applied with a roller or approved airless sprayer.  Spray apply to exterior wall in a single coat at a minimum 10-14 wet mils through approved airless spray equipment.  Size 623 spray tip is recommended.  Roller apply to exterior wall assembly using vertical strokes with slight diagonal slant.  Apply to recommended thickness of 10-14 wet mils..  If application temperatures drop below 20° F or exceed 95° F consult PassiveHouse Provisions technical service. Inspect for pinholes, voids or gaps in the membrane and repair as needed. Allow product to cure and dry. These times will vary depending on temperature, substrate, and humidity.  At 70°F and 50% humidity Path 2 Zero Energy WALL should be dry to touch in 1 hour.