R-Guard | Joint and Seam Filler | By Prosoco | 20 oz Sausage
PROSOCO R-GUARD® Joint & Seam Filler is a high modulus, gun-grade crack and joint filler, adhesive and detailing compound that combines the best of silicone and polyurethane properties.
Joint & Seam Filler is part of the family of PROSOCO R-GUARD® products developed to prevent the unwanted movement of water and air through building envelopes.
Utilize Joint & Seam Filler to prepare open joints, seams and cracks before installing R-GUARD FastFlash; any R-GUARD Primary Air & Water-Resistive Barrier; or other waterproofing and air barrier components in new or existing wall assemblies. Joint & Seam Filler is a high modulus, gun-grade crack and joint filler, adhesive and detailing compound that combines the best of silicone and polyurethane properties. This single-component, fiber-reinforced, Silyl-Terminated-Poly-Ether (STPE) is easy to gun, spread and tool. Use Joint & Seam Filler to fill openings and create transitions where flexible reinforcement is required to bridge gaps and provide continuous support of fluid-applied flashing membranes, waterproofing or air barrier components. Suitable for all climates,
Joint & Seam Filler bonds directly to damp or dry surfaces and cures under a variety of weather conditions. It dramatically reduces surface preparation time by eliminating the need for reinforcing tapes at sheathing joints, inside and outside corners. Use Joint & Seam Filler as part of a building wide PROSOCO R-GUARD® Air & Water Resistive Barrier system, or to prepare surfaces for conventional waterproofing or air barrier components. Appropriate for vertical or horizontal, above-grade applications to concrete, masonry, natural stone, structural sheathing, architectural metals, painted metals, glass, PVC, FRP, EPDM and most other building materials.
PROSOCO R-GUARD® Joint & Seam Filler fills openings and creates transitions where flexible reinforcement is required to bridge gaps and provide continuous support of fluid-applied flashing membranes, waterproofing or air barrier components. R-GUARD Joint & Seam Filler is a high modulus, single component, fiber-reinforced Silyl-Terminated-Poly-Ether (STPe) gun-grade detailing compound suitable for all climates. Joint & Seam Filler bonds directly to damp or dry surfaces and eliminates the need for reinforcing tapes at sheathing joints, inside and outside corners.
TYPICAL TECHNICAL DATA
FORM: pale red, gun-grade sealant
SPECIFIC GRAVITY: 1.40 to 1.50
TOTAL SOLIDS: 99 percent
VOC: 30 grams per Liter, maximum.
Complies with all known national, state and district AIM VOC regulations.
Coverage
Coverage varies based on surface texture and irregularities. Spread 1 inch beyond joint at 20 to 30 mils. Joint width varies 0.0 to 0.25 inch
- 38.5 to 60.5 lineal feet per 20-oz sausage at 20 to 30 mils
Prosoco Joint & Seam Product Data Sheet.pdf